Dohmann
  • 详细说明
  • 产品参数
SPECIFICATIONS
 
The Helix 1 turntable is capable of mounting two pickup arms simultaneously and is fully integrated with an internal motor which drives the platter via dual belts.
 
The turntable comes with separate power supply and servo control box which is connected by two custom cables to the turntable chassis.
 
The turntable is designed to be mounted on a wide variety of surfaces as it has an intrinsic suspension system fully integrated with the chassis. 
 
The specification includes the ability for the turntable to work in older style buildings and domestic locations where wooden floors and building movement create instability and issues such as feedback and footfall interference. The Helix 1 is isolated from these issues. 
DIMENSIONS AND WEIGHT
 
HELIX 1 - TABLE
 
Width 600mm (24”) x Depth 480mm (19”) x Height 250mm (10”)
 
HELIX 1 – CONTROL BOX
 
Width 483mm (19”) x Depth 480mm (19”) x Height 133mm (5”) 
Standard 3RU (19 inches) Configuration.
 
POWER
 
120 VAC, 50/60Hz 2 amps or 220/240 VAC, 50/60 Hz 1 amp
 
Combined shipping weight is 80Kg (shipped in 2 custom fabricated boxes).
 
Recommended installation requires a surface capable of supporting up to 80Kg (160 pounds) and a 620mm (25”) wide x 500mm (20”) deep surface for the isolation platform to be able to move freely.
 
Factory set speed selection by push button for 33 1/3 or 45 rpm.
 
The Helix 1 allows 33, 45 and if required 78RPM and a wide variety of engineering adjustments to create “audio bliss” that is very user friendly and easy to operate. 
 
Multiple arms up to 12 inch are accommodated with ease of operation and setup assured. Removable arm boards allow simple interchange and calibration.
 
 
Note: Set-up assistance and complete service available worldwide through authorised dealer and representative network.

COPYRIGHT 2016 保捷贸易有限公司